BGVQD - SCOTCHWELD 3500B CORE SPLICE ADHESIVE,PT B

Product Identification

Product ID:SCOTCHWELD 3500B CORE SPLICE ADHESIVE,PT B
MSDS Date:01/01/1988
FSC:8030
NIIN:00-145-0534
Kit Part:Y
MSDS Number: BGVQD

Responsible Party
3M COMPANY - ADHESIVES COATINGS, SEALERS DIV
3M CENTER
ST PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: SAME

Cage: 04963

Contractor
3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV
SAINT PAUL, MN 55144-1000 US

Telephone: 800-364-3577/651-737-6501(24 HOURS)

Cage: 04963

Ingredients

EPOXY RESIN

CAS: 5026-74-4

Fraction By Weight: 60-70%


CLAY

CAS: 68953-58-2

Fraction By Weight: 20-30%

Hazards

LD50 LC50 Mixture:NOT GIVEN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITANT, ALLERGEN,
Effects of Overexposure:EYE: IRRITATION POSSIBLE. SKIN: IRRITATION AND
POSSIBLE ALLERGIC REACTIONS. INHALATION: IRRITATION OF UPPER
RESPITORY TRACT. INGESTION: IRRITATION OF GI TRACT. DUST FROM
FABRICATION MAY IRRITATE ANY O RGAN EXPOSED.
Medical Cond Aggravated by Exposure:ANY PREEXISTING ALLERGY,
SENSITIVITY OR ORGAN DYSFUNCTION.

First Aid

First Aid:EYE: FLUSH 10 MINUTES W/AMPLE WATER. SKIN: WASH WITH SOAP:
WATER, INHALATION; REMOVE TO FRESH AIR. GIVE OXYGEN OR ART
RESPIRATION AS REQUIRED, INGESTION: DO NOT INDUCE VOMITING. IF
CONSCIOUS, GIVE TWO GLASSES MILK OR WATER, CALL PHYSICIAN PROMPTLY
ALL EXPOSURES IF PROLONGED OR SEVERE.

Fire Fighting

Flash Point:NONE
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICALS
Fire Fighting Procedures:USE SCBA WHILE FIGHTING FIRES INVOLVING THIS
MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:OBSERVE ALL PRECAUTIONS GIVEN. COLLECT SPILL
BY WIPING OR WITH ABSORBENT AS REQUIRED, PLACE IN CLOSABLE
CONTAINER.

Handling

Handling and Storage Precautions:USE W/ADEQUATE VENTILATION ONLY. KEEP
CONTAINER CLOSED.

Exposure Controls

Respiratory Protection:NONE GIVEN
Ventilation:USE ONLY W/SUFFICIENT VENTILATION TO PREVENT VAPOR BUILDUP.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES, CHEMICAL GOGGLES.
Work Hygienic Practices:AVOID EYE-SKIN CONTACT. DO NOT INHALE OR
INGEST, VAPOR OR DUST FROM FABRICATION.LAUNDER CONTAMINATED
CLOTHING BEFORE USE
Supplemental Safety and Health
ENTRY PER 3M MSDS DOC#10-9703-9 DATED 16JAN89, 3M GENERIC ID IS
62-3500-XXXX-X, PART B OF TWO-PART B/A KIT.

Chemical Properties

HCC:N1
Spec Gravity:0.65
Solubility in Water:VERY SLIGHT
Appearance and Odor:TAN PASTE WITH PUNGENT ODOR.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON OXIDES, SMOKE PARTICLES

Disposal

Waste Disposal Methods:INCINERATE OR LANDFILL IAW ALL LAWS & REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.